. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. When you get time can you run IntelBurnTest v2.50 and report your CPU temps?
    http://www.ultimate-filez.com/files/IntelBurnTest.zip

    This will really test how good your cooling is.
    "If first you don't succeed, redefine success"

  2. Quote Originally Posted by Mad Professor View Post
    This will really test how good your cooling is.
    I'll, but to have precise cooling capability comparison I would have to use this program with old heatsink as well. For temp check I use ASUS AI Suite- program supplied together with mainboard. 2h 15min of running a comp and temp is 37C, but I believe as a result of water heating up in a water storage tank(3l plastic bucket).
    Click image for larger version. 

Name:	P1160798.jpg 
Views:	1030 
Size:	604.1 KB 
ID:	3867

  3. Quote Originally Posted by Mad Professor View Post
    When you get time can you run IntelBurnTest v2.50 and report your CPU temps?
    Quote Originally Posted by Mad Professor View Post
    http://www.ultimate-filez.com/files/IntelBurnTest.zip

    This will really test how good your cooling is.
    I've run this test @ standard stress level,5 times to run. Max CPU temp reached 59 centigrade in a peak (when started this test the comp was running for nearly 10h non stop since morning). Is my cooling any good then?
    Few issues appears:
    1st- Top surface of the CPU is not perfectly flat
    2nd- Average temp of the chipset is higher than 55 centigrade with standard heatsink.
    Click image for larger version. 

Name:	cpu water cooler 15.JPG 
Views:	2749 
Size:	67.4 KB 
ID:	3896

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Do you need to water cool erhm a water cooled spindle?!!
    By HankMcSpank in forum Generic Chinese Spindles
    Replies: 18
    Last Post: 02-10-2013, 09:59 PM
  2. Replies: 17
    Last Post: 18-09-2013, 06:32 AM
  3. Spindle Water Pump
    By Tomnewry in forum Spindles & Drive Motors
    Replies: 0
    Last Post: 11-08-2013, 01:05 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •