Thread: Ragged edges
Threaded View
-
18-03-2011 #1
Ok my learning curve continues.
I designed a simple house in CAD software, imported it to Vectric Cut2D to create the toolpaths and exported to Mach3 as part of my learning.
The house in the photo: http://www.flickr.com/photos/59593297@N07/5537454838/
is my 2nd attempt at using the software combo above.
Although generally happy, I noticed the edges of the 3.6mm ply used, are ragged and torn especially around the windows. I'm not sure why?
I used a 3mm ball nose cutter and think this may be part of the reason and think an end-mill may be better. Possibly the feed rate was too fast, or the cutter not sharp enough, or the ply not suitable? I'm not sure really.
I would be grateful for any suggestions at this point. Thanks.
Simon.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
RFQ: Drill/Tap Guide Block for 15mm aluminium plate edges.
By Wal in forum Projects, Jobs & RequestsReplies: 11Last Post: 29-11-2012, 04:23 AM -
Milling experts, end mills cutting edges different lengths ?
By Smiler in forum Tool & Tooling TechnologyReplies: 2Last Post: 14-02-2009, 10:13 PM
Bookmarks