Thread: Wonders on Z axis
Threaded View
-
26-03-2011 #1
Hello,
I am designing an aluminium frame CNC.
I will post someday pictures of the full machine I intend to do.
For the moment, I have troubles with my Z axis design that you can see below.
For those who know, I have used carriages from Ahren Cncrouterparts.
My concern: how to get the maximum travel on z axis.
Lets have a closer to my design:
On this picture, I have put the z axis as low as possible.
For me, the available travel is min 30 mm (cf. picture), depending on the length of the bit I will use.
How can I increase this travel?
Fix my router further down on the interface plate? I fear cantilever...
For the moment the router is fixed 30 mm below the carriage.
Can I increase it?
Other solutions you have used?
ThanksLast edited by LabSkis; 26-03-2011 at 09:03 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
5-axis Breakout Includes Hand-Held Control Port & 3,4,5-axis Postion-Display Port
By LoveLearn in forum General ElectronicsReplies: 12Last Post: 25-05-2013, 12:41 AM -
RFQ: Z axis and y axis carriage
By D-man in forum Projects, Jobs & RequestsReplies: 0Last Post: 08-04-2013, 10:06 AM -
NEW MEMBER: Goal - Enable 3-Axis CNC Bed Mill to Perform 5-Axis Milling
By LoveLearn in forum New Member IntroductionsReplies: 2Last Post: 25-01-2012, 08:46 PM -
Y axis is making X axis stall...!!
By fasteddy in forum Machine DiscussionReplies: 83Last Post: 24-10-2011, 12:19 PM -
Precision metal processing (3 axis, 5 axis, 7 axis) OEM
By 7AxisCNC in forum Manufacturer NewsReplies: 0Last Post: 17-05-2011, 02:04 PM
Bookmarks