Hybrid View
-
05-04-2011 #1
-
05-04-2011 #2
I used to buy paints off ebay or from my local Jawel Paints paint shop in W-ton (they are on e-bay as well). Try to buy paint+activator deal. You will need 2K thinner as well. For a small width blade I would recommend touch-up spray gun for example: ( http://www.machinemart.co.uk/shop/pr...l-touch-up-gun or
http://cgi.ebay.co.uk/GRAVITY-FED-MI...item53e6c9bfe1 ). Remember this paint not only dries , but hardens as well so mix no more than you need and clean tools straight after painting (with 2K thinner).
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Making a little box
By mark84 in forum General DiscussionReplies: 5Last Post: 11-03-2014, 11:34 PM -
RFQ: Small sized Parts need making, small batches
By Ptee in forum Projects, Jobs & RequestsReplies: 3Last Post: 17-01-2014, 06:07 PM -
Mold Making?
By Shinobiwan in forum Moulding MachinesReplies: 10Last Post: 27-02-2013, 02:15 AM -
Program to generate Gcode for wind turbine blades
By Jonathan in forum CAD & CAM SoftwareReplies: 12Last Post: 09-04-2011, 01:14 PM -
Making a Jig
By Wobblybootie in forum Gantry/Router Machines & BuildingReplies: 3Last Post: 06-06-2010, 11:17 AM
Bookmarks