Quote Originally Posted by HankMcSpank View Post
https://sites.google.com/site/cncdiyorg/2520 (I reckon about £600 + import duty + VAT)
Seems expensive to me, why are you so sure you don't want to make one? A machine that size is relatively simple.
Anyway, it says the spindle speed is only 10,000rpm. That's good with regards to noise, but you're not going to cut PCBs very fast at that speed. I generally use about 25mm/min per 1000rpm. So 250mm/min with that spindle, which is a lot less than the machine is capable of.