Hybrid View
-
05-04-2011 #1
Last Activity: 22-01-2024
At least the last one has ball screws!!
Peter
-
05-04-2011 #2
Last Activity: 17-04-2012
It also has a much smaller working area 300x180x55 IIRC
Originally Posted by ptjw7uk
It won't do milling particularly well either and there is no way to overcome the limitations to do milling on it. Have a look at specs of milling machines what you will find is they are heavy. The heavier the machine the bigger the cut you can make.
You will not even get a vice on the table, i have a drilling vice that has a height of 45mm and it is not suitable for milling just drilling.
But if you bought a mill it would do milling and with an extra WC VFD run spindle you could do your pcbs etc the alternative is two machines.
Phil
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Chinese Spindles
By Ricardoco in forum Generic Chinese SpindlesReplies: 123Last Post: 05-12-2016, 12:16 AM -
Upgrade? Chinese CNC Machine
By Carlb1058 in forum Machine DiscussionReplies: 120Last Post: 15-08-2013, 09:04 AM -
BUILD LOG: From Chinese to Taffynese
By Carlb1058 in forum DIY Mill Build LogsReplies: 6Last Post: 09-07-2013, 12:03 AM -
A decent little (PCB miilling) Chinese machine...
By HankMcSpank in forum Machine DiscussionReplies: 5Last Post: 18-06-2013, 06:59 PM -
Chinese CNC machine modifications - Discussion
By craigrobbo in forum Milling Machines, Builds & ConversionsReplies: 2Last Post: 14-05-2012, 06:51 PM
Bookmarks