Hybrid View
-
03-04-2011 #1
Yes, I know the backup/support will suck!
Yes, I know delivery & import duties will be excessive!
but parking that for a mo, what do you reckon to this machine....
http://cgi.ebay.co.uk/CNC-3040-ROUTE...item19c2929124
cos bluntly, the one I've built from scrap is not up to it - no surprises there (it's fine for dabbling...but I'm past the dabbling stage now(!) & I just can't justify the time researching & building my next machine.
I'm only really wanting a machine to mill acrylic, mill the odd PCB (but a small bit of ali would be nice though :-) ) .....noise level is one of my overiding concerns (neighbours!)...I'm figuring that the whirring of the steppers is gonna be loud (the driver seems below par....no microstepping)
Thoughts?Last edited by HankMcSpank; 03-04-2011 at 06:59 PM.
-
04-04-2011 #2
If the work envelope will suit you then seems ok but nearer £600 with all the add ons.
Couldnt find what the nuts were made off or what drivers its got!
Peter
-
04-04-2011 #3
Actually, I hummed & hah'ed for a while (always a good thing as I often change tack!) then I happened upon a reasonably good site (well, by Chinese Standards anyway).... http://cncdiy.org/ ...they've got a 'which CNC is best for me' matrix listed on there ...and he actually makes some important points. I guess we're all guilty of trying to spec/buy a jack of all trades CNC machine , but as he poijnts out that's a mistake...I really only need a small machine to mill acrylic & PCBs, but I was going to buy a larger one in case I needs to do something bigger, but with size comes weight (obviously), noise, vibration, flexing etc (not welcome if 90% of my stuff is small anyway!).....so I'm just going to buy the minimal I can get away with size wise & go for this one (which his matrix recommends for PCBs)...
https://sites.google.com/site/cncdiyorg/2520 (I reckon about £600 + import duty + VAT)
if push comes to shove, I'll get a larger one for my other needs at a later date.
-
04-04-2011 #4
The only thing to be aware is that is gonna be a noisy machine at full revs
The noise will be coming from the tool spindle hardly any from the stepper motors/drivers.
To cut down the noise you need a water cooled spindle but they tend to be bigger in relation to the motor supplied with that machine so a water cooled spindle will not fit that machine.
Be careful of the shipping cost, the ebay machine looks almost identical and that would cost £746 inc shipping, plus any import taxes
Phil
-
04-04-2011 #5
-
04-04-2011 #6
Maybe it's just the way they've all been recorded, but I'm struck at how much noise the Chinese water cooled spindles still seem to put out in some of the youtube videos folks have uploaded ! (perhaps it's just the microphone being too close to the cutter - but for example - http://www.youtube.com/watch?v=2OZCv...eature=related (2m16 in) ...or maybe the acoustic vibration/whine of the spindle is being amplified by the machine frame?
-
05-04-2011 #7
In the video it makes the point ' with a lot less noise' Best to sak JohnS as he has one of the spindles.
The noise will vary anyway when its cutting. If its less noise than a router at full tilt ... then its quieter.
If you cut anything at 24000 rpm then its going to make a noise anyway!
peter
-
05-04-2011 #8
Seems expensive to me, why are you so sure you don't want to make one? A machine that size is relatively simple.
Anyway, it says the spindle speed is only 10,000rpm. That's good with regards to noise, but you're not going to cut PCBs very fast at that speed. I generally use about 25mm/min per 1000rpm. So 250mm/min with that spindle, which is a lot less than the machine is capable of.
-
05-04-2011 #9
It's a time thing really...I've just been made redundant (20yrs with the same company! Hey ho...at least they gave me a big fat cheque, which rather than spend on loose women and fast cars - which my wife says I can't - I thought I'd put it towards some stuff that will make some stuff) ....so I now need to get some of these 'widget' ideas out of my head & into the market to see if they're viable! (if not, I'm gonna have some fun anyway! "March of the makers" eh"?!!)) I don't want to be dicking about spec'ing a machine. then ordeing a bit from here, a bit from there, then assembling blah blah....that takes time & for all you think I'd have loads of time on my hands, I don't (not to be building a machine anyways).
The more I mull this, I realise/concede that it's probably best to have a machine that's capable of milling aluminium...some of the widgets I have in mind are gonna need injection moudling (there only small simple pieces, but nevertheless the cost of getting them made is prohibiitve), so having a machine strong enough to mill steel/ali will be of great help if I do need to make simple injection moulds (but best do that when the neighbours are out!) .... a bench top injection moulding machine would be nice too!Last edited by HankMcSpank; 05-04-2011 at 01:38 PM.
-
05-04-2011 #10
No my spindle is the air cooled one, not water.
These are not as quiet as the water ones, running at 12,000 they are quiet enough to not be upsetting, flat out at 24,000 they do make a bit of noise, about the same as a kress at number 1 or 2 on the thumb wheel.
I have seen the water cooled ones and they are quiet.
I think a lot of the noise on these video's is picking noise up you don't hear. I have a video here that was filmed out in the desert in Oman and it's unwatchable because of the noise of the wind and you can't hear the conversation but when we were filming it we didn't notice any wind and were talking normally ??John S -
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Chinese Spindles
By Ricardoco in forum Generic Chinese SpindlesReplies: 123Last Post: 05-12-2016, 12:16 AM -
Upgrade? Chinese CNC Machine
By Carlb1058 in forum Machine DiscussionReplies: 120Last Post: 15-08-2013, 09:04 AM -
BUILD LOG: From Chinese to Taffynese
By Carlb1058 in forum DIY Mill Build LogsReplies: 6Last Post: 09-07-2013, 12:03 AM -
A decent little (PCB miilling) Chinese machine...
By HankMcSpank in forum Machine DiscussionReplies: 5Last Post: 18-06-2013, 06:59 PM -
Chinese CNC machine modifications - Discussion
By craigrobbo in forum Milling Machines, Builds & ConversionsReplies: 2Last Post: 14-05-2012, 06:51 PM
Bookmarks