Happy New year to all coming up. May we all have a great year of designing and learning.

Boyan, I did reset the OD of the shaft back to 35 mm + .02mm on both sides of the gear.
The inner diameter hole was set to 26 mm.

The pulley is 33.899 mm outer, 29.533 at the tooth lowest point
Wall thickness from lowest tooth point to inner dia is ~1.85 mm.

Yes M_C, I was doing this to eliminate the pulley step and as Jonathan posted earlier to lower the moment of inertia. (hope i didn't open another can of worms by saying that.LOL
mutzy
Click image for larger version.  Name: Latest Revision 1.jpg  Views: 955  Size: 76.4 KB  ID: 23517Click image for larger version.  Name: HTD 22 teeth Gear.png  Views: 931  Size: 40.3 KB  ID: 23518