Thread: Rotating Ballnut - design ideas
Hybrid View
-
28-04-2020 #1
Last Activity: 07-11-2023
Well, this one was bugging me today, so I did some digging and the good Mr NTN came up with the info.
edit I guess it's friction/heat that's the issue?? OK angular contacts may not have the load capacity of rollers, but usually have lower coefficient of friction (1.2....2) than tapered rollers (1.7....2.5). I did see that there's been some recent advances in roller bearings pushed on by trying to get better efficiency in automotive, but they don't seem to be generally available at a nice priceLast edited by Voicecoil; 29-04-2020 at 08:50 AM.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 11 users browsing this thread. (0 members and 11 guests)
Similar Threads
-
Rotating Ball nut
By drumsticksplinter in forum Lead Screws, Nuts & SupportsReplies: 30Last Post: 12-05-2020, 08:01 PM -
Interesting Papers on heavy duty design, vibrations, composites and column design
By D.C. in forum Gantry/Router Machines & BuildingReplies: 15Last Post: 25-06-2016, 10:13 PM -
Rotating Ballnut Design MK3
By Jonathan in forum Linear & Rotary AssembliesReplies: 0Last Post: 15-12-2013, 01:35 PM -
advice on floating bearing - outer ting rotating
By dsc in forum Lead Screws, Nuts & SupportsReplies: 8Last Post: 18-11-2013, 02:23 PM -
Design help etc required with DIY CNC Router Design / Build
By MikeyC38 in forum Gantry/Router Machines & BuildingReplies: 12Last Post: 21-10-2011, 04:50 PM
Bookmarks