. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 06-07-2011 #11
    Jonathan's Avatar
    Lives in Leicester (Home) or Nottingham University (2nd Home), United Kingdom.
    Jonathan
    Last Activity: 05-04-2020 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 3,571. Received thanks 325 times, giving thanks to others 8 times. Referred 1 members to the community.
    Video here:

    http://www.youtube.com/watch?v=mSNFD...=youtube_gdata

    Whipping caused it to stall at 15m/min. That be less of a problem when everything is mounted properly.

    Some pictures:

    Click image for larger version.  Name: DSC07964 (Large).JPG  Views: 3424  Size: 185.5 KB  ID: 4229

    Click image for larger version.  Name: DSC07962 (Large).JPG  Views: 2287  Size: 193.8 KB  ID: 4230

    At 8m/min I couldn't stall it by pushing on the gantry. Above that I
    can, but only by bracing myself against the wall and pushing with both
    hands...otherwise it just pushed me along the floor.

    After the video I tried adjusting the acceleration. It went up to 3m/s^2 quite happily.
    Last edited by Jonathan; 06-07-2011 at 11:48 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 12 users browsing this thread. (0 members and 12 guests)

Similar Threads

  1. Rotating Ball nut
    By drumsticksplinter in forum Lead Screws, Nuts & Supports
    Replies: 30
    Last Post: 12-05-2020, 08:01 PM
  2. Interesting Papers on heavy duty design, vibrations, composites and column design
    By D.C. in forum Gantry/Router Machines & Building
    Replies: 15
    Last Post: 25-06-2016, 10:13 PM
  3. Rotating Ballnut Design MK3
    By Jonathan in forum Linear & Rotary Assemblies
    Replies: 0
    Last Post: 15-12-2013, 01:35 PM
  4. advice on floating bearing - outer ting rotating
    By dsc in forum Lead Screws, Nuts & Supports
    Replies: 8
    Last Post: 18-11-2013, 02:23 PM
  5. Design help etc required with DIY CNC Router Design / Build
    By MikeyC38 in forum Gantry/Router Machines & Building
    Replies: 12
    Last Post: 21-10-2011, 04:50 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules