Rotating Ballnut - design ideas

[boldford]

I've just found this quote from John S. a long time ago:



(Source: http://groups.yahoo.com/group/CAD_CA.../message/70038)

Backdriving could still be an issue, but you could add some friction to the handle and/or a lock easily enough to combat that. That's tempted me to convert my lathe ... I could probably still use my design for the router, perhaps with better (tapered roller maybe) bearings as the forces are likely to be greater. The tricky bit will be fitting the ballnut into the cross slide.

Perhaps interestingly, the George Taylor milling machines used a similar arrangement. The lead-screw being turned by the hand-wheel and the nut being turned by the self-act. http://www.lathes.co.uk/taylormiller/