Thread: Encoder Signal to PC
Threaded View
-
25-04-2011 #1
I'm after a little help.
I want to be able to connect either a rotary encoder or a linear encoder to a PC. I want to use the signal and convert it on the PC to a mm size. I little like DRO but I want to intergrate into a small bit of self programmed software. My preference is to mount the module on a DIN rail but I can sort all that out. First problem is finding a module that can convert the encoder signal to the PC.
Any help would be good,
Cheers
Ant
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Need to slow down a signal due to Safe Torque Off alarm
By corkcnc in forum General ElectronicsReplies: 0Last Post: 04-06-2014, 11:35 PM -
WANTED: Wanted Linear Scale/Encoder
By gavztheouch in forum Items WantedReplies: 9Last Post: 24-01-2013, 05:32 PM -
Encoder for Spindle RPM
By abfa9358 in forum Gantry/Router Machines & BuildingReplies: 1Last Post: 12-04-2011, 09:03 PM -
re servo encoder
By Scott in forum General ElectronicsReplies: 6Last Post: 24-06-2010, 08:30 AM -
+5V TTL Signal
By NC-Joey in forum General ElectronicsReplies: 2Last Post: 12-08-2007, 02:46 PM
Bookmarks