Thread: wanted drive belt and pulleys
-
06-05-2011 #1
hi iam after a 20t timing belt pulley and a 1500mm long belt or bigger 10mm wide or bigger. iam in the west mids.
adam
-
06-05-2011 #2
-
13-05-2011 #3
Got a pair of 23T, take 3/8 pitch, 1/2 inch wide belt (150L) ? 13.5 mm shaft currently fitted with 8mm bushes. Not grub screws, fit by an inner tapered boss, total thickness 1 inch. Got a belt but only about 360mm.
TomSherline lathe, Chester DB11V lathe, Myford/ Rodney mill, CNC mill Isel/ home made, Sealy Hack Saw, Meddings Pillar drill.
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
Best timing belt and pulleys type for minimum backlash
By paulus.v in forum Belt Drive, Pulleys & TimingReplies: 14Last Post: 10-06-2018, 11:18 AM -
Belt drive on a router
By John S in forum Rails, Guideways & BearingsReplies: 23Last Post: 10-09-2012, 09:39 PM -
any one know where to get a belt drive convertion for x2
By Scott in forum Sieg Milling MachinesReplies: 15Last Post: 27-09-2010, 08:44 PM -
Belt drive and pulley sizes
By j2sip in forum Belt Drive, Pulleys & TimingReplies: 22Last Post: 20-06-2010, 10:44 AM -
Re: Standard Drive Belt Size ?
By HS93 in forum Belt Drive, Pulleys & TimingReplies: 0Last Post: 18-05-2009, 03:30 PM
Bookmarks