Z axis height setter

[kell]

thanks cropwell
Using my machine is now coming a lot clearer, but working on the machine is not my main priority if you see what i mean, so i am like a blind man when coming to modding it.

It would be great to have the macro.
I have a tool setter block but it was purchased from ebay rightly or wrongly. ( would like to buy a good one but not sure where from ? }

I will find out which bob mine is and get a few pics as i will definitly need help with the correct connections to it.

There is also one fault on my machine that may hammper me when i have to do a tool change i first have to send it to my work zero point , change tool and set z then resend to zero then press cycle start. If not the machine trips and i have to restart all over from a line in the code, not sure if this will affect the macro.
I am going to look at a bigger z motor to try and over come the fault.

thanks again for reply
kell