CNC Router Machine?????

[anamsey]

Hi,

I'm looking to cut and route my own kitchen/bedroom doors. I do the carcasses and want to upgrade. I'm on a tight budget and not sure which cnc router machine is suitable. I've seen a couple of cheap ones, ranging from £8k - £14k and some very expensive ones £35k+.

There's rhonmac £8k, a dutch one thats £13k, then there's the italian ones that are £35k+

I'm after some advise as to which one would be suitable because all of them are telling me same things and I'm confused. I want a machine that I can start with and upgrade at a later date, any help would be appreciated on this.

[omnicnc]

Anamsey, firstly, you see this machine working performance, http://s1232.photobucket.com/albums/...t=OMNI1325.mp4, then see the machine features: http://www.omni-cnc.com/products/CNC...r_OR1325A.html. This machine is designed special for woodworking industry. Fitting Panasonic servo motor, Taiwan Hiwin linear guide way and bearing, running at 30m/min, with HSD 6hp spindle made in Italy, fitting with non-oil vacuum pump, dust collector, total price is less than £10k.
http://s1232.photobucket.com/albums/...t=MOV00409.mp4 This link is about OR2030 CNC router with Panasonic servo motor show.
Contact us if you are interested in.