Hi - northern newbie

[Jonathan]

thanks for the response, I'm going to be doing around 200 doors a day. The router needs to cut the mdf sheet to door size and some will need to be routed out. I've seen a cnc by mantech for round 16k, 4.5kw, he said it should do the job, i'm not sure, hence the reason I want advise.

That sounds like something that could be made quite easily if you're only using it to cut MDF. As Robin says, read around on the forum and you'll find plenty of information to do it. Have a look at some of the build logs.

What cutting area do you require? If it's cutting the MDF out then a vacuum table is the easiest (and also most expensive) option. Given the number of parts you're making it's probably worth it.