Please help :-(

[jpcnc]

Hi Michael
There is a regulator on the compressor and one on the machine, the cmpressor kicks in around 70psi I think and shuts off around 100psi?

[m.marino]

Okay and what is the required system pressure for the mill you are running? The system should be 150% of the required pressure to operate IF the compressor is able to maintain that load. If not you need to increase to reserve pressure so that the mill can maintain the minimum pressure it needs to operate required functions. That should fix it fine. The manual should give that information.

Michael

[jpcnc]

i dont have the manual unfortunately