Luke11CNC Build Log ,I'm so naïve

[luke11cnc]

Jonathan I will order the one from rapid on Tuesday

Will I need to order anything else for it (box) or will it fit in a old computer case along with my drivers and break out board

James

[Jonathan]

Computer case will be fine. Wire is cheapest from Rapid:

http://www.rapidonline.com/sku/Cable...119346/02-1066

(I'll buy the spare from you)

I emailed them and they said 2 weeks to deliver it.

Also for the power supply I'd get a bridge rectifier and terminal strip. I'll find them tomorrow when the site is working. They will also have suitable switches for limit switches.

[JAZZCNC]

I have a spare torodal transformer and some 4700-100v caps and probably Br-rec that will get you 70+volts if you haven't bought them yet.
The torod is almost new I think it's 1000va but will have to dig it out to get full specs to be sure then i'll be able to work for you the exact volts + amps.
I think i've got 4x caps which can be wired parallel and If memory serves me I think this transformer and 4 caps was giving me around 76 ish volts and 14A ish.

PM me If this is any use to you and I'll give you my contact details.