Luke11CNC Build Log ,I'm so naïve

[Jonathan]

I've not done a lot to the CNC machine over the weekend as we where looking a schools for Luke, plus I have two wedding this weekend so I will try and get some photo's up this week as we did strip out a computer ready for the drivers.

I see.

The jig is just a location jig for the Y-axis supported rails as I want to make sure they are true and square on the extrusion I also had to have some m10 T-nuts made as the supplier of the extrusion only go up to m8 plus you had lot's and lot's on your plate and with going back to University I didn't like to ask you to do more before you went back.

Ok, that's true. I think I've got some spare M10 T-nuts as I made a load for my rotary table. Migh be M8, bit late now anyway.

How are you doing anyway Jonathan I've not heard for you for ages and ages??

Er... fine I suppose. Not so much to do now I'm back at University! I've just started continuing my (quite) high voltage stepper driver design/prototype as that's something I can do here.

I am waiting for some 10mm round bar to help attach the 50x50 extrusion to the gantry sides I will come over not this weekend but next weekend if that's OK

That's suits me. By waiting do you mean have ordered or will order soon? If it's the latter then maybe don't bother as I will almost certainly have some.