Luke11CNC Build Log ,I'm so naïve

[luke11cnc]

I've been looking at my gantry all day and some think is not right and after about 3 hours I decided to get my set square out.


and this is what I found


The above image shows that the gantry is out of square by 1.5mm

the above image shows the joint is fitting nice and tight (this is the left side)

the above image shows the gantry is out by .5mm

am I being to picky does it really matter that much that the Gantry is not square

Well I think so

there is no stress to force the gantry out of square as all bolts have been taken out and the rails are not bolted down the only fixings is the three button bolts in the side of the gantry.

Now I have tried to force the gantry square but it is solid and will not move.

I am at a lost and getting frustrated
what is my options Please Please advise what I need to do :question::question:


James