Aluminium CNC log.

[Jonathan]

Looks good, except for one thing. You have put the rails for the Z-axis on the Y carriage. It's much stronger if you have the bearing blocks for the Z-axis on that carriage (in addition to the bearings for Y). I mentioned it in post #23 and #60. Although having said that with the way you've orientated it it wont make too much difference.

If you don't mind me asking, how much did it cost to get those bits cut?

Also, What kind of wiring do I need? This will be used for my Steppers, Spindle to VFD, and generally all the wiring.

Erm, post #53. Same wire for steppers and spindle to VFD.