Aluminium CNC log.

[jcb121]

The 6 Inch stuff will be 10mm to thin. it's either get something 10mm wider or knock 40mm off my cutting area!

[Jonathan]

That's annoying as the next size up is 10" then 12"... if you decide to get the bigger size which has to be in a 2m length (I phoned them and they said they don't sell smaller) I might buy the spare from you. For a good price :lol:.

[jcb121]

the only way I could make it work with 6" would be to mount the supported rails on the very edge of the alu and filed down the screw supports.

I'm talking 1mm from the edge of the hole to the side of the alu.

If i went for 10" it would be silly as my Z axis would be so wide it would be worse then using the 6" with the rails mounted properly!