Thread: Aluminium CNC log.
Threaded View
-
01-08-2011 #10
Last Activity: 08-12-2015
the only way I could make it work with 6" would be to mount the supported rails on the very edge of the alu and filed down the screw supports.
I'm talking 1mm from the edge of the hole to the side of the alu.
If i went for 10" it would be silly as my Z axis would be so wide it would be worse then using the 6" with the rails mounted properly!
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Aluminium box section
By martin54 in forum Gantry/Router Machines & BuildingReplies: 11Last Post: 28-10-2012, 01:13 AM -
First Aluminium cut
By luke11cnc in forum Computer SoftwareReplies: 15Last Post: 24-02-2012, 09:39 AM -
RFQ: Aluminium sculpture to be CNC'ed
By dav in forum Projects, Jobs & RequestsReplies: 6Last Post: 07-01-2012, 04:37 PM -
Aluminium passivation - for aluminium to be used outside
By CHudson in forum Metal Finishing TechniquesReplies: 4Last Post: 06-04-2011, 09:18 PM -
MDF or Aluminium
By rob_colby in forum Gantry/Router Machines & BuildingReplies: 3Last Post: 24-10-2010, 09:36 PM
Bookmarks