i7 Water cooling system

[Jonathan]

That's really quite cool

That's the general idea.

out of interest how long did it take to cut the mother board components out

It was so long ago I can't really remember (they're still not fully cut out as I've been doing other things). Do you mean to make the whole profile, or just cutting them out once the inner profile is complete?

Looks like we both use the same method for mounting material and parts to the table.
First mount material, do all insides and holes then mount parts through holes and cut outside profiles.

Almost - I generally get it to drill the holes first, then put screws in those holes and then cut the inside and outside profile. Doing it in that order means the material doesn't have to be clamped to the bed particularly well to start with.
It gets annoying when, as I have today, there's 180 parts to screw down with 2 screws in each...tried double sided tape but that left a bit of a mess and still needed one screw in each to be sure.