Thread: Stepper motor as a generator??
Threaded View
-
08-08-2011 #9
[QUOTE=wiatroda;23291]Jonathan have a loot at this video, It nicely shows how turbulent wind is in urban area.[/URL]
The thing is it will vary for each site, which in my opinion makes discussing in general terms not very productive.
The VAWT in that video is a drag based machine (so TSR<1), so is inherently inefficient compared to any HAWT, and better VAWTs. At a higher windspeed (which after all is what we're interested in since power is proportional to wind speed [b]cubed[b/]) the turbine with TSR>1 (i.e. VAWT or HAWT with airfoil profile blades) will generate much more power. If the wind is turbulent then I think neither of this type will be that effective since when the wind is coming from many different directions the resultant force on each 'section' of the blade will be different - so the overall torque may not be that much. So that implies that yes a drag based VAWT would work better than HAWT in turbulent wind, but still not generate much power as it wont benefit from higher windspeeds. Also in tubulant winds fatigue on the VAWT blades, which are already highly stressed compared to a HAWT, will be greater possibly leading to faliure.
I tend to agree that VAWT should be better in turbulent wind, just from common sense. I think that it's not worth considering having a wind turbine if your site is very turbulent (unless you don't need much power, say off grid). However if you've made it yourself, and therefore very cheaply then why not experiment... design the generator so you can try VA and HA with the same swept area and compare.
If the wind is that turbulent then you should just put the turbine higher, and use a HAWT. Granted planning permission is an issue, but it's clearly the best way.
Not one of a useful size, the moment of inertia is high and therefore cannot accelerate into the wind without a larger force from a big tail, and the gyroscopic forces would be large, so it is going to need a very strong tower to do that ... etc it's just not worth it.
Also in the video it says 'The HAWT will turn in lighter winds so it it more efficient' ... which is a bit of a dodgy statement.Last edited by Jonathan; 08-08-2011 at 09:59 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
What size stepper motor do I-need.
By irving2008 in forum Stepper & Servo MotorsReplies: 46Last Post: 15-06-2017, 09:18 AM -
Stepper Motor Driver - cheap similar to ArcEuro 4.2A Bi-Polar Stepper Motor Driver
By craynerd in forum Motor Drivers & ControllersReplies: 1Last Post: 16-03-2014, 07:29 PM -
Running a three phase router/mill on a generator?
By gavztheouch in forum General ElectronicsReplies: 3Last Post: 19-02-2013, 12:39 PM -
Stepper motor help.
By Kammo1 in forum Stepper & Servo MotorsReplies: 4Last Post: 12-02-2010, 11:11 AM -
Stepper motor help
By Mucky Mike in forum Stepper & Servo MotorsReplies: 2Last Post: 04-04-2009, 04:25 AM
Bookmarks