. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Quote Originally Posted by Jonathan View Post
    Keep a spare then? Unless the proper ones are less than twice as much as the cheap ones and don't charge for repair you're still winning. I bought my second one and it arrived in about 4 days, not bad I thought.
    Yes keeping a spare does make sense but it does workout more expensive. A quick look and I can get a 2.2kw torque vector drive for £137 and probably cheaper for flux drive(Non vector) if I shopped about. I've seen them as low as £99 +vat obviously the VAT don't matter if your business thats vat registered.

    Just looking on ebay the Huanyang vfd would be approx £85 x 2= £170 plus VAT and import duty if your unlucky plus the usual £10 for the robbing shipping companys charge.
    Yes it would probably be slightly cheaper because you'll get the first about £60-70 if bought with spindle. Yes you will have 2 drives but both will be Non vector drives even then thou it's still a close call if you buy like for like non vector drives that you could get 2 for only slightly more in UK. In this case then for the little extra it would still make more sense to buy local for warranty advantage.

    If a business it's something that needs carefull attention and although 4 days hisn't long it's still 3 more than couriering from most places in UK, which could be as low as hours depending where purchased from. To a business even 1 day of down time could make the difference between making money and blowing money or going POP.!!

    Personally If it was my main living I'd have a spare all the time and both would be vector drives bought in UK. . . . I'd also have a spare spindle.!

  2. #2
    Quote Originally Posted by JAZZCNC View Post
    Personally If it was my main living I'd have a spare all the time and both would be vector drives bought in UK. . . . I'd also have a spare spindle.!
    Same, although if vector drives (and the corresponding advantages) didn't exist it would be less clear cut.

    I didn't get charged by customs on the VFD, they said it was shipped from the UK and I can't remember if that was actually true. Probably not, and I also hate the £10! But try ignoring it and you get lots of letters (it was worth a shot).

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. CNC Build - TEP milling machine conversion
    By craynerd in forum Gantry/Router Machines & Building
    Replies: 6
    Last Post: 06-07-2015, 02:09 AM
  2. Someone to help me build a machine
    By mandev in forum Gantry/Router Machines & Building
    Replies: 8
    Last Post: 29-01-2014, 02:07 PM
  3. DIY Machine to Build?
    By paulkane1 in forum Gantry/Router Machines & Building
    Replies: 3
    Last Post: 03-12-2012, 02:24 PM
  4. NEW MEMBER: Second machine build
    By tmsboss in forum New Member Introductions
    Replies: 1
    Last Post: 04-09-2010, 01:11 PM
  5. Best Type of Machine to Build?
    By Kevin in forum Gantry/Router Machines & Building
    Replies: 6
    Last Post: 05-08-2009, 02:50 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •