1st Build, Second machine

[m.marino]

Jonathan,

I would prefer to have the 8 mm that a ER16 allows an ER20 is overkill for me. While I will be working with some metals in the future that is a bit down the road and I primarily work with plastics that need a high finish. With the machine as it is I will easily be able to do that with out a big problem with the Kress as the position I was in with the old machine was the machines in ability to be any where as near as accurate as I needed.

m_c,

thanks for the heads up on the smoothstepper and I will be waiting whether I wanted to or not as have too much to get done that requires funds going other places. The good news is that will be generating income and with the new machine should have a very nice return. Which will go part in the bills to live, part into paying more materials to meet orders and parts to be saved up for upgrades as possible.

Hope every one is doing well and m_c; once I have it up here from Jazz, drop me a message and we can see about that project you need cut.

Michael

[JAZZCNC]

Hope every one is doing well and m_c; once I have it up here from Jazz,

Thou M/C don't hold your breath because the B'#*?ard is fighting back and has started taking root . . :rofl: