. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    I think I'm going to buy this set up as it has two extra drivers (spare or extra axis if needed)

    http://www.ebay.co.uk/itm/6Axis-CNC-...#ht_3337wt_905

    but still unsure if it's the right think to buy

    James

  2. #2
    Quote Originally Posted by luke11cnc View Post
    I think I'm going to buy this set up as it has two extra drivers (spare or extra axis if needed)

    http://www.ebay.co.uk/itm/6Axis-CNC-...#ht_3337wt_905

    but still unsure if it's the right think to buy

    James
    Good find - they are the right thing to buy. It would be interesting to compare them to the PM752 - theoretically they should work just the same on 75V, but you never know.

    Optoisolated breakout board with drivers that are already isolated can cause problems if you don't wire it right. Don't worry about it though, I'm sure it'll be fine.

  3. #3
    Quote Originally Posted by luke11cnc View Post
    I think I'm going to buy this set up as it has two extra drivers (spare or extra axis if needed)

    http://www.ebay.co.uk/itm/6Axis-CNC-...#ht_3337wt_905

    but still unsure if it's the right think to buy

    James
    Misleading advert though. THe description seems honest enough but they have put pictures of stepper motors in as if they are included, when the auction is for just the electronics.

  4. #4
    Quote Originally Posted by Peter. View Post
    Misleading advert though. THe description seems honest enough but they have put pictures of stepper motors in as if they are included, when the auction is for just the electronics.
    Don't see the problem, you've noticed it's just the drivers and breakoutboard so you've not been mislead. The rest is clearly there for advertising.

    Quote Originally Posted by Peter. View Post
    Well, the pictures form a large part of the description for many people. Some are not so good at reading and rely on them heavily.
    They should read the description. Pretty sure that's in the eBay policy somewhere...if you can't read then you're probably not going to be buying stepper drivers anyway!

    Quote Originally Posted by Peter. View Post
    I think if they are not included they should either not be in the picture or it should say quite clearly - stepper motors not included
    It says clearly what is included so surely it's natural to assume the rest is not?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Stepping Motors & Drivers
    By irving2008 in forum Stepper & Servo Motors
    Replies: 3
    Last Post: 28-04-2015, 09:37 PM
  2. have you put ball screws on an X2plus?
    By bmbaz in forum Milling Machines, Builds & Conversions
    Replies: 5
    Last Post: 14-05-2014, 06:56 PM
  3. buying ball screws
    By bmbaz in forum Marketplace Discussion
    Replies: 2
    Last Post: 10-05-2014, 03:57 PM
  4. 2x Motors, 2x drivers. How about breakout?
    By Tenson in forum Motor Drivers & Controllers
    Replies: 2
    Last Post: 20-09-2012, 03:21 PM
  5. Best way to machine ball screws?
    By Ross77 in forum Lead Screws, Nuts & Supports
    Replies: 34
    Last Post: 17-06-2012, 05:10 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •