Thread: Drawing of water cooled spindle
-
26-08-2011 #1
Could anyone help. I need a very basic outline drawing with dimensions of one of the 2.2kw water cooled spindles that are being sold on ebay. I'm trying to develop my concept for a router and this would be a great help.
-
26-08-2011 #2
How basic do you want it? also what format do you need it in? Those two items are top on my list to be able to even look at doing a "quick" draw up of it.
Michael
-
26-08-2011 #3
If you google you will find it ... I did at the time. However this exercise may be of limited value as the length (and possibly other dimensions) of the spindles do vary.
-
29-08-2011 #4
I was looking for a very basic drawing or sketch so I could work out the height and position of my X axis. I thought it might be sensible to work back from the tool, spindle, tool holder, etc.
-
29-08-2011 #5
-
The Following User Says Thank You to Ricardoco For This Useful Post:
-
11-02-2014 #6
Is this an acceptable (i.e. the latest) drawing for the 2.2kW spindle many people use?
What is the typical total (ER20) collet length sticking out the end, beyond the 213mm dimension shown?
For facility to cut 300mm in Z, what are the typical minimum and (more importantly) maximum length tools one might put in said collet?
Is there a standard mount or offset (in mm) used for axis of spindle from mounting plate?
Cheers, Charles
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
Do you need to water cool erhm a water cooled spindle?!!
By HankMcSpank in forum Generic Chinese SpindlesReplies: 18Last Post: 02-10-2013, 09:59 PM -
Cooling a water cooled spindle, without pipes everywhere & huge water tanks/buckets!
By HankMcSpank in forum Generic Chinese SpindlesReplies: 17Last Post: 18-09-2013, 06:32 AM -
Chinese 2.2 water cooled spindle / Which VFD ?
By dudz in forum Motor Drivers & ControllersReplies: 20Last Post: 16-08-2013, 02:22 PM -
water cooled spindle
By alex wight in forum Generic Chinese SpindlesReplies: 1Last Post: 21-09-2012, 09:57 PM -
water cooled spindle opinions
By phill05 in forum Generic Chinese SpindlesReplies: 7Last Post: 23-02-2012, 05:00 PM
Bookmarks