Thread: Mounting motor under table?
-
01-09-2011 #1
Assuming there are no clearance issues with the table/nut, are there any disadvantages to mounting the motor under the table, parallel to the leadscrew?
Another of my soon-to-be-infamous-for-low-quality example images:
(not sure if the picture worked, ISP is being a pain today)
I'm hoping that a pulley system of some form would be suitable to belt-drive the leadscrew from that location.
-
01-09-2011 #2
IMO I dont see any problems with mounting as drawn as long as the spindle protudes enough for a pully, and I think it keeps things tidy.
Jim
-
The Following User Says Thank You to GTJim For This Useful Post:
-
01-09-2011 #3
-
01-09-2011 #4
You could mill a pocket in the shaft side of the aluminium to accommodate the pulley if there is not enough space.
Pulleys are definitely good plan as they will let you change the ratio allowing the stepper motor to be put in the right region of the speed/torque curve. You can also swap them round to get more resolution if required.
-
The Following User Says Thank You to Jonathan For This Useful Post:
-
01-09-2011 #5
This is similar to what i did with my first machine.
http://www.mycncuk.com/forums/attach...2&d=1269125465
Plenty of pics on my build
http://www.mycncuk.com/forums/showth...tempt-Of-A-CNC
-
03-09-2011 #6
Sorry for the delay in replying. Had ISP issues for a few days and my posts seem to intermittently require moderator approval (though I think it's when the post includes links).
Jonathan: I think I'll be looking at some kind of pocket, but I still haven't started to research the pulley systems yet so I don't know what I will need in terms of size and clearance.
AdCNC: Awesome build. This axis isn't fixed to the main structure though, it will be the X axis unit mounted on the Y axis.
-
04-09-2011 #7
-
04-09-2011 #8
Just to prove how slowly my brain works... by 1/2 wide do you mean I need to accomodate a diameter of 1/2", or it will protrude 1/2"(+bit sticking out for setscrew) from the mount?
-
04-09-2011 #9
I meant the width of the timing belt should be at least 1/2". You can calculate it ... but that works fine for me so etc.
I would want the shaft to stick out as far as you can get it to as it depends on the pulley, where the setscrews are and the position of the other pulley.
-
04-09-2011 #10
Fair enough, so until I settle on a firm number I'll pencil in 1 1/2" clearance from the surface of the mounting block for the pulleys. I suppose judiciously placed idlers would also help with increasing the engagement with the belt.
Is belt something that can be shortened easily, or will I be confined to designing around what is available?
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
single and 3 phase motor sizing and mounting ?
By Musht in forum General ElectronicsReplies: 5Last Post: 27-10-2013, 09:58 PM -
Dilemma with ball screw and motor mounting
By luke11cnc in forum Lead Screws, Nuts & SupportsReplies: 4Last Post: 12-08-2011, 10:58 AM -
Mounting a chuck on a Rotary table
By irving2008 in forum Machine DiscussionReplies: 17Last Post: 02-09-2010, 07:23 PM -
FOR SALE: Isel-automation Flat bed X-Y table with motors and mounting plate
By Vespa Mad in forum Items For SaleReplies: 8Last Post: 27-08-2009, 08:45 AM -
2 ways of mounting motor
By Steve-m in forum Gantry/Router Machines & BuildingReplies: 8Last Post: 28-02-2009, 01:12 AM
Bookmarks