. .

Thread: where to start?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Quote Originally Posted by trounce View Post
    @JAZZ - I've got 4 offcuts leftover with which I'll use to brace the four corners, when you suggested the removable braces should run the same way and said three per bay that would make 12 in total including the larger 60 x 60 pieces?
    Yep thats what's required IMO 3 piece's, thou it's not much more material than the way you had it in squares.
    Don't under build the bed for the sake of bit extra steel, If you must use less steel then at least drill the holes ready and add it later. (Thou before you start using it or never will get fitted.!)

    Looking good. . . keep the pics flowing and we'll turn a blind eye to any chicken shit runs we see. .:lol:

  2. #2
    Its been a while since I've managed to get any more work done on the bed but its now almost finished.
    It took me forever to cut all the damn brackets and then drill and tap all the holes but thankfully that tedious job is over and done with :tup:

    Just a bit of tidying up on a few of the welds that ended up looking pretty dire and then to give it all a nice coat of paint.


    Click image for larger version. 

Name:	6.jpg 
Views:	316 
Size:	511.5 KB 
ID:	4683

    Click image for larger version. 

Name:	7.jpg 
Views:	314 
Size:	436.1 KB 
ID:	4684

Thread Information

Users Browsing this Thread

There are currently 3 users browsing this thread. (0 members and 3 guests)

Similar Threads

  1. Where to start?
    By Inquisitor in forum Gantry/Router Machines & Building
    Replies: 7
    Last Post: 27-11-2012, 02:35 PM
  2. where to start
    By martin54 in forum Gantry/Router Machines & Building
    Replies: 16
    Last Post: 22-09-2012, 11:29 AM
  3. is this 2.5d where do i start? help please if you can
    By h4ppy-chris in forum General Discussion
    Replies: 4
    Last Post: 29-03-2011, 12:21 PM
  4. NEW MEMBER: Were do I start?!
    By tonygagey in forum New Member Introductions
    Replies: 4
    Last Post: 07-08-2010, 07:55 PM
  5. Where to start?
    By ricey3 in forum Computer Software
    Replies: 10
    Last Post: 25-10-2009, 08:01 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •