Threaded View
-
06-09-2011 #1
I'm busy converting a BFE65 head with an unknown XY table + stand. It's coming along well - but I'm a little stuck with gearing the table/head...
I'm using 3Nm SY60 steppers with a microstepping PM542 driver. It's driving 16mm x 5mm lead linearmotionbearing ballscrews. Any idea what factors I should be using to calculate my pulley ratios?
Should I be basing it on what I want the jog speed to be, or max torque or pulses per inch? 50% torque on my motor is at 1650rpm (5.5k pps)
Any advice would be most appreciated - thanks!
Last edited by jamezwarner; 06-09-2011 at 12:46 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Rack & Pinion Gearbox/Gearing
By andrewbond in forum Rack & Pinion SystemsReplies: 21Last Post: 12-09-2015, 09:10 AM -
Hobbymat BFE65 Leadscrew info, fitting anti backlash nuts
By manofgresley in forum Milling Machines, Builds & ConversionsReplies: 6Last Post: 09-05-2014, 04:35 PM -
VFD retrofit Hobbymat BFE65
By manofgresley in forum Milling Machines, Builds & ConversionsReplies: 16Last Post: 13-09-2013, 05:07 PM -
motor gearing (cog) help please
By martin54 in forum Linear & Rotary MotionReplies: 5Last Post: 06-07-2013, 11:48 PM -
Hobbymat MD65
By craigrobbo in forum Milling Machines, Builds & ConversionsReplies: 3Last Post: 29-08-2012, 09:36 PM
Bookmarks