TEP educational CNC machine using TechCAD

[martinstokes]

I have the software.

I can also tell you it is not worth the effort of getting it going. I replaced it all with RAMPS years ago.

http://rollingpast.com/john/techcad/

Please let me know when you have it so I can delete it from the server.

That was quick thank you so much ! I have downloaded the two zips so you can remove them. I hesitate to ask more questions after you have been so helpful and please excuse my total ignorance but I guess if it's zip I need to run on something like xp (I have xp and later windows, but use mainly linux) ? and what is RAMPS and how do I do that?

Thanks in advance

Martin.

[Mjolinor]

That was quick thank you so much ! I have downloaded the two zips so you can remove them. I hesitate to ask more questions after you have been so helpful and please excuse my total ignorance but I guess if it's zip I need to run on something like xp (I have xp and later windows, but use mainly linux) ? and what is RAMPS and how do I do that?

Thanks in advance

Martin.

Presumably you use Nautilus as a file manager if you are a Linux user. That will unzip the files, that is what made the files. I do not use any Windose products other than mice, that is the only thing they do correctly.

[martinstokes]

Presumably you use Nautilus as a file manager if you are a Linux user. That will unzip the files, that is what made the files. I do not use any Windose products other than mice, that is the only thing they do correctly.

Thanks. Can I run this TEP engraving machine with linuxcnc - it only has serial port on the cnc interface?

[Mjolinor]

Thanks. Can I run this TEP engraving machine with linuxcnc - it only has serial port on the cnc interface?

You can but not the software that I posted. That runs under Micro$haft only. I can't remember but it may be a DOS programme.

I disassembled the PIC and got LinuxCNC to sort of work but never really took it anywhere because an ON/OFF Z axis is not that useful so I just went all RAMPS with a proper Z axis.

I still have it but have not used it for years because it is just easier to order PCBs form China than it is to do them yourself.