Thread: Diy Brushless Spindle
-
30-06-2014 #161
Мотор водяного охлаждения OBL29/19 (2375)пойдет под er11
Mod Note: Translated: Engine cooling water OBL29/19 (2375) will go under er11Last edited by Lee Roberts; 30-06-2014 at 10:29 PM.
-
30-06-2014 #162
Пожалуйста, говорите по-английски, поэтому мы можем понять вас.Онлайн-переводчик должен быть достаточно, спасибо.
I think he's trying to point us to this: http://www.amazon.com/Thunder-Tiger-.../dp/B007KMZ6V4
.Me.Me
-
12-11-2014 #163
Hi guys, I know this is somewhat of an old thread but I registered on this website because of it. I am looking everywhere for those C10, ER20, 100L collet chuck but I can't seem to find one... only found the 50L version and it isn't long enough for the outrunner I bought. I will try reusing this 50L somewhere else, but I need a 100L and was wondering where to get one? I'm trying on eBay, but I can't seem to find any, must be because I live in Canada...
If someone knows where to buy one new C10-ER20-100L collet chuck, please reply to this post, or if you own one and are willing to ship it to me that would be awesome! Thanks a lot and I hope I'll be able to make this DIY since it mimicks exactly what i've been looking to do
-
13-11-2014 #164
-
13-11-2014 #165
This is an ER16 collet chuck, I need an ER20 collet chuck, but thanks silyavski :)
I found some after searching through the posts here but had to modify the link for my region (canada) because it wasnt showing up
Here is the link, for those interested in Canada (might work elsewhere too, but wasnt working for me with a .com.uk):
http://www.ebay.ca/itm/111501420293?...84.m1439.l2649
-
13-11-2014 #166
That's the seller I bought mine off....arrived quickly if I seem to remember correctly.
-
13-11-2014 #167
-
13-10-2015 #168
-
24-10-2015 #169
Hi there,
I'm a complete novice with CNC and aero motors and speed controllers. Does anybody know the bits i'd need to order (motors, KVA and speed controllers all a bit of a puzzle) in the UK that would enable me to build something like this?
Thanks in advance
-
24-10-2015 #170
What you trying to cut? This will influence what KV motor you use etc...
Thread Information
Users Browsing this Thread
There are currently 14 users browsing this thread. (0 members and 14 guests)
Similar Threads
-
Denford router - Brushed router too brushless spindle - Help and advice please
By Tom B in forum Brushless Spindles & MotorsReplies: 4Last Post: 16-05-2016, 09:13 AM -
All-In-One Brushless Servo System
By Gytis in forum Stepper & Servo MotorsReplies: 0Last Post: 22-12-2015, 10:21 PM -
DIY Brushless spindle
By booski in forum Brushless Spindles & MotorsReplies: 2Last Post: 30-10-2013, 09:36 AM -
Using RC Brushless motors as spindle
By Jonathan in forum Brushless Spindles & MotorsReplies: 30Last Post: 20-12-2012, 08:51 PM -
Mach 3 control of DC Brushless motor?
By templecorran in forum Artsoft Mach (3 & 4)Replies: 15Last Post: 18-11-2010, 04:20 PM
Bookmarks