Diy Brushless Spindle

[Snowy]

Cheers Neil,
Exactly the kind of info i'm needing
Snowy

[PunkR0ckz]

Hi guys, sorry to "revive" this thread, but I would like to know if somebody has been able to control this kind of spindle (outrunner with an ER collet) with an Arduino UNO to be able to achieve precise RPMs? As this would make it much more practical for the kind of use I want to make out of it... if so, how did you achieve it? Would it bother you sending the line of codes / diagram / pictures / videos or anything else to show what you did and all that? I am a newb when it comes down to electronics and really want to achieve this ! Thanks !!

[Daved01]

Hi all
would this be any good as the motor, it has 10mm shaft and 200kv. I found a spindle that is 10mm URL="https://www.amazon.co.uk/dp/B07Q7473NH/?coliid=I1PB48BH2P8JSU&colid=1WM4D42BOQDI4&psc=1&r ef_=lv_ov_lig_dp_it"]https://www.amazon.co.uk/dp/B07Q7473NH/?coliid=I1PB48BH2P8JSU&colid=1WM4D42BOQDI4&psc=1&r ef_=lv_ov_lig_dp_it[/URL]
any other good ones around
Ta D

[cedricb]

...I know it has been 10 years since the thread started... just wondering if somebody could make me one like Mark's with double bearing ?
I fancy doing a small drill press like this one -> https://www.youtube.com/watch?v=T-ieUwOoqgw
This will be used for drill wood and occasionally acrylic/ aluminium so maybe maximum of 4000 rpm.