Well what the hell....decided to buy a couple
have you worked out a posh (easy) way to keep the lube in and the crap out of these un-sealed bearings ? its one of the reasons i havnt used mine yet :)

Mark / Jonathan are either of you up for making a bearing housing for me?? For a price of course....
im up to my neck at the moment so hopfully jonathan will pick this up... you will need two stepped washers making unless you can find belleville washers that are 22mm (just under 22mm so they clear the inner housing)
it is probably a good idea if you do a drawing so you can thrash out any problems you might have