Quote Originally Posted by Villacherman View Post
Anybody have an idea if these type motors will deliver decent torque at 500 RPM?
Not unless you either rewind the motor to get a lower kv, or use belts, which you are doing. Still 500rpm is pushing it with one belt reduction. I think you'd need two. My brushless motor spindle is a big 12 pole motor, so it's quite slow - but still 6000rpm on the full 50V. Eleven to one reduction isn't happening with one belt, but 3:1 to get max 2000rpm would probably be fine with that motor. You would only get about a quarter of the power out of that motor, but a quarter of 6kW or so is still plenty!