Quote Originally Posted by Villacherman View Post
Neil- maybe me bringing the bearings over and sending them through you post system would be faster! Any other parts hard to get there? Belleville washers?

Adam
It can't be any slower Adam!!! Thing is I want these as they are 22mm OD which is better as the motor mounting bolt holes are 3mm dia on a 30mm PCD which only leaves 2.5mm wall thickness.

Belleville washers are ok, I've found a couple of suppliers and Mark kindly said he'd give me enough if I was struggling!

Gonna crack on with the bearing housing now and wait for the bearings...