-
24-09-2011 #1
Tutorials
I think it would be a good idea if the people that can would give Tutorials on how to turn a drawing into a working cutting example
Ie
one of my first jobs is the cut a quadrant out of maple
3" piece of square wood by 1 meter
so you draw the 3" by 1 meter on a 2D program and then what?
how do you translate a curve to the x-axis/cnc program ??
I think it would be really helpful to us beginners if some one did a project for us all to follow
what do you experts think
James and Luke:confused::confused:
-
24-09-2011 #2
Just off out now but I'll do one tonight using Draftsight and Vectrics Cut 2D if that suits ?
Post a bit of a sketch of the shape if you can.John S -
-
The Following User Says Thank You to John S For This Useful Post:
-
24-09-2011 #3
-
24-09-2011 #4
But what do people think a bout doing a series of tutorials
even a Video walk through ??
James
-
24-09-2011 #5I think it would be a good idea if the people that can would give Tutorials on how to turn a drawing into a working cutting example
it can be a nightmare at first but if you have the gumption to finish a build you definatley have the gumption to crack a bit of cad/cam (scuse the pun:naughty:)
I'll do one tonight using Draftsight and Vectrics Cut 2D
even a Video walk through ??
-
24-09-2011 #6
I never watch videos of people showing you how to use a program. They're almost exclusively slow and inefficient. If the program in not intuitive then I find the 'paper' tutorial, or help file. It's so much easier and quicker to just skim that document to find the required information than follow a video.
For Vectric there are these pdfs:
http://www.vectric.com/WebSite/Vectr..._tutorials.htm
Luke: I'll show you how to do it in person when the time comes. For that particular part you'll probably have to export it from the CAD program as an STL and import into whatever CAM program you choose...
-
24-09-2011 #7
Everyone has their own way of learning. Sometimes you just need to see something happen. I'm not a big fan of video tutorials for software in general but they have a useful place alongside written tutorials. There have been a few things that just didn't make sense until I saw it done.
If by "slow and inefficient" you mean that the tutorials do not take the shortcuts you use, then you are missing the point. Learn first, get fast later. As long as the tutorials are not giving blatantly bad information then they are fine. Once someone has built up some experience with the software, they are ready to learn the shortcuts.
There are some very good video tutorials for SolidCam that I found to be an excellent complement to the written materials (and can be found here if anyone is interested: http://www.solidcam.com/solidcam-professor.html). Each to their own, one supposes.
-
24-09-2011 #8There are some very good video tutorials for SolidCam that I found to be an excellent complement to the written materials (and can be found here if anyone is interested: http://www.solidcam.com/solidcam-professor.html). Each to their own, one supposes.
im not sure good cam software is intuative, soidworks is pretty easy to get into but solidcam is a bit of a **** .... you cant play it by ear at all but it starts getting petty slick once you press the right buttons and twiddle the right knobs :tup: it takes a bit of heart ache and pain first though
(i never could get it to make any sense of my 4th axis)
when i say "good" cam sofware i mean exotic... for doing acrobatic tool paths and all sorts of posh graphics for simulations.... probably a bit over kill for most and very very over priced for us mear mortals :)Last edited by blackburn mark; 24-09-2011 at 05:24 PM.
-
24-09-2011 #9
I still think it's a good idea
Luke: I'll show you how to do it in person when the time comes. For that particular part you'll probably have to export it from the CAD program as an STL and import into whatever CAM program you choose...
if I could afford it I would go to night school
I know my son Luke would and learn from a video as that's all he does (watch youtube LOL)
however I know he is going to learn a lot from Jonathan as he looks up to him as a expert and a teacher.
James
-
24-09-2011 #10
OK glad to see Johnathan has sorted you.
John S -
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Drawing of water cooled spindle
By GTJim in forum Spindles & Drive MotorsReplies: 5Last Post: 11-02-2014, 04:21 PM -
How to generate Lathe GCode from a drawing?
By Robin2 in forum Computer SoftwareReplies: 18Last Post: 25-10-2013, 04:04 PM -
Aspire tutorials supplied with the installation dvd
By habibuzziwa in forum CAD & CAM SoftwareReplies: 4Last Post: 17-11-2012, 03:38 PM -
Programming Denford TRIAC from a drawing !
By edwardsjc in forum Machine Control SoftwareReplies: 1Last Post: 15-03-2012, 09:29 PM -
drawing to g-code
By ptjw7uk in forum Programmers CornerReplies: 12Last Post: 21-06-2009, 12:49 AM
Bookmarks