Threaded View
-
21-10-2011 #9
I got the order changed . Am ordering the bits from linearmotionbearings2008, which many have spoken of well. I'll get a drawing done so the more experienced on the forum can critique. The long axis design should be ok with the vertical loads on the rails, but on the short axis with supported rails not too sure here - as there are torque and vertical loads from the z-axis carriage and router to account for - the top bearing carries vertical and torque and the bottom bearing carries the torque loading only. I'm sure you guys will steer me appropriately
Thanks
Mike
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Interesting Papers on heavy duty design, vibrations, composites and column design
By D.C. in forum Gantry/Router Machines & BuildingReplies: 15Last Post: 25-06-2016, 10:13 PM -
BUILD LOG: Steel frame cnc router design/build
By CraftyGeek in forum DIY Router Build LogsReplies: 110Last Post: 06-05-2015, 10:00 PM -
Design Help Pt2 Required for CNC design/Build
By MikeyC38 in forum Gantry/Router Machines & BuildingReplies: 38Last Post: 21-07-2014, 02:05 PM -
Critique required on y-axis design.
By Spedley in forum Gantry/Router Machines & BuildingReplies: 2Last Post: 06-05-2013, 09:17 PM -
RFQ: Looking for someone to design and build me a cnc pipe router/cutter
By D-man in forum Projects, Jobs & RequestsReplies: 0Last Post: 07-11-2010, 01:59 PM
Bookmarks