Mach3 Controlling Huanyang HY02D223B 2.2KW VFD

[Agwan]

Hi,

I use this VFD and control it from Mach3 using RS-485. There is a nice plugin for Mach3 to make the control and you have to set the VFD settings correct. I had no problems doing this.

Just do NOT buy from solar.jean on ebay. Jack ju´s store. For your own sake. Some people probably got a working spindle from him, but I did not. The cone for the collets was 7.5 degrees instead of 8. Meaning my tools throw 0.3mm. He spend a lot of time between each mail and saying that he would help me. And said he would pay for the return shipment and everything. Just to delay everything so that the time to complain on E-bay would be lost. And then no more answers from him. The last thing he said is that I could just use some grinding paste on a collet and turn it around in the cone to fixt the problem. But polishing away 0.2mm using a collet, is that really a good idea?

Try him if you want, I would never buy from him again. Just as a warning.

[Jonathan]

Just do NOT buy from solar.jean on ebay.

Interesting... Chip and I got spindles and VFDs from him and they've been fine. I'm sure other people on the forum have too. Maybe he changed supplier?