Mach3 Controlling Huanyang HY02D223B 2.2KW VFD

[frans cop]

Yes it is possible, either by configuring it for digital input which allows you to select (I think) 8 different speeds or by using the anologue speed control input and mach's PWM output which may require smoothing. I'm sure you'll find it if you look on CNC zone. I've not done it yet as I prefer to control it myself.

Here's the English-ish manual which should clarify things:

http://www.jinlantrade.com/ebay/invertermanual.pdf

[frans cop]

VFD convertor HuanyangHy02d223b frequence convertor.
We have a VFD convertorHuanyang hy02d223bfrequence convertor, and we obtain the problem that we can drive a motot of 2,2Kw 1750 Rpm, but no pmower is driving the motor, i.e. the motor runs untill a welldefined lower frquence, but above that frequence the motor does’nt turnanymore, although we hear in the motor that the frequence ( sound in motor )amounts in function of the pot meter setting.




We thing ithas something to do with the parameter setting in the convertor, but did’ntfind the solution untill now.


The frequency isadjustable up to 400 Hz higher than 32 Hz he stops, and as he turns he has notorque.

PD01 – 0 ( instellingen vanaf VFD paneel )



PD005 - 400

PD004 - 400

PD003 - 400

PD006 - 2.5

PD007 - 1.20

PD008 - 220

PD009 – 15



PD011 – 0



PD041- 5



PD015 - 1

PD072 - 400.00

PD143 - 2

PD142 - 7

PD144 - 3000,



PD015 - 1

PD072 - 400.00

PD143 - 2

PD142 - 7

PD144 - 3000,





Has anybodysome idea about the reason of this problem ?

[frans cop]

This are the motor characteristics