Thread: Spindle cooling pump
Threaded View
-
03-11-2011 #1
I have a 1.5kW water cooled spindle. The machine was supplied with a 3000lph pond type pump. The problem that I have is, this pump is not really suited to this application as it is a high volume low pressure pump. When you connect this to the spindle, the pump struggles due to the back pressure caused by the small orifices in the spindle and it stalls after approx 10mins running. Obviously not ideal!
Anybody found a suitable inexpensive solution.
Perhaps this:
http://www.ebay.co.uk/itm/UK-Submers...#ht_2427wt_922
Ta.Last edited by p1lts; 03-11-2011 at 07:17 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Spindle Water Pump
By Tomnewry in forum Spindles & Drive MotorsReplies: 0Last Post: 11-08-2013, 01:05 PM -
Cooling pump suggestions
By martin54 in forum General ElectronicsReplies: 2Last Post: 13-02-2013, 09:07 PM -
water cooling options for spindle
By routercnc in forum Tool & Tooling TechnologyReplies: 24Last Post: 12-02-2012, 11:22 PM -
(Video) Water spindle cooling system
By jafc76 in forum General DiscussionReplies: 0Last Post: 30-12-2011, 02:31 PM -
chinese spindle cooling
By johngoodrich in forum Tool & Tooling TechnologyReplies: 11Last Post: 03-08-2011, 11:19 AM
Bookmarks