-
29-11-2011 #11
Mark,
Didnt see any email from you.
Call me on 01202 237770 or email me on [email protected]
Check to see if the FSI type nut will fit before butchering the ballnut.
the dimensions are on our website under the gten brand of ballscrews.Visit Us: www.automationshop.co.uk
-
29-11-2011 #12
Didnt look at the link, just googled the mill.
you can use 3nm motors on the X and Y and a midle size nema 34 on the Z, but, if you can fit smaller nema 34 on the X and Y, i would think it would be better.
you can also gear the X and Y with a 2:1 as well if using a 3nm motor
This will add to the resolution and give you a but more grunt as well.Visit Us: www.automationshop.co.uk
-
29-11-2011 #13
Email on its way, thanks for the help in advance!
-
30-11-2011 #14
Gary,
As above, im also looking at this mill with cnc setup, what would be your price for a bundled kit to do this conversion.
Cheers
Stu
-
30-11-2011 #15Visit Us: www.automationshop.co.uk
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Matching Drivers with Steppers
By hoppo in forum Motor Drivers & ControllersReplies: 4Last Post: 21-11-2012, 01:19 PM -
Optimum voltage for M60STH88-3008DF steppers and 752 drivers?
By Mad Professor in forum Stepper & Servo MotorsReplies: 6Last Post: 26-08-2012, 09:38 PM -
Has anyone used these steppers or drivers?
By Jonathan in forum Stepper & Servo MotorsReplies: 2Last Post: 24-03-2011, 02:24 PM -
Are the Zapp 3NM steppers good with their PM-752 drivers?
By Jonathan in forum Stepper & Servo MotorsReplies: 19Last Post: 28-05-2010, 03:34 PM -
Steppers and drivers
By Davidh in forum Motor Drivers & ControllersReplies: 3Last Post: 12-06-2009, 05:59 PM
Bookmarks