Hi

The machine is like a Grizzley G0704, not an X3 and you have to cut part of the ballnut away. It seems well documented on CNCzone (see link at top with drgs etc).

However im struggling more with the steppers and Drivers. Most people over there are using Kelling drivers and 381/425oz direct drive steppers on x and y and 906oz direct stepper on Z, (and some only using a Gecko G540). I would like to know what the options are for kit from the UK that works as a package, its not worth importing from US with tax and shipping (weight of steppers and PSU) etc.

Gary you should have an equiry from me via your website .

Cheers

Mark