Any one used drivers and steppers from CNC4you

[sebring115]

Hi

The machine is like a Grizzley G0704, not an X3 and you have to cut part of the ballnut away. It seems well documented on CNCzone (see link at top with drgs etc).

However im struggling more with the steppers and Drivers. Most people over there are using Kelling drivers and 381/425oz direct drive steppers on x and y and 906oz direct stepper on Z, (and some only using a Gecko G540). I would like to know what the options are for kit from the UK that works as a package, its not worth importing from US with tax and shipping (weight of steppers and PSU) etc.

Gary you should have an equiry from me via your website .

Cheers

Mark

[Gary]

Mark,
Didnt see any email from you.
Call me on 01202 237770 or email me on [email protected]
Check to see if the FSI type nut will fit before butchering the ballnut.
the dimensions are on our website under the gten brand of ballscrews.

[Gary]

Didnt look at the link, just googled the mill.
you can use 3nm motors on the X and Y and a midle size nema 34 on the Z, but, if you can fit smaller nema 34 on the X and Y, i would think it would be better.
you can also gear the X and Y with a 2:1 as well if using a 3nm motor
This will add to the resolution and give you a but more grunt as well.

[sebring115]

Email on its way, thanks for the help in advance!