. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 07-12-2011 #2
    Jonathan's Avatar
    Lives in Leicester (Home) or Nottingham University (2nd Home), United Kingdom.
    Jonathan
    Last Activity: 05-04-2020 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 3,571. Received thanks 325 times, giving thanks to others 8 times. Referred 1 members to the community.
    Most CAM programs accept *.DXF and/or *.STL files, and the following link says Blender does export in those formats ... so yes it looks like you can.

    http://www.blender.org/features-gallery/features/

    Although interestingly it specifies *.DXF only in the '3D' section, so it may not support 2D *.dxf's. Try it and see...dxf is good for 2.5D work and STL for 3D profiles.
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to Jonathan For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Drawing of water cooled spindle
    By GTJim in forum Spindles & Drive Motors
    Replies: 5
    Last Post: 11-02-2014, 04:21 PM
  2. How to generate Lathe GCode from a drawing?
    By Robin2 in forum Computer Software
    Replies: 18
    Last Post: 25-10-2013, 04:04 PM
  3. Programming Denford TRIAC from a drawing !
    By edwardsjc in forum Machine Control Software
    Replies: 1
    Last Post: 15-03-2012, 09:29 PM
  4. Tutorials - From a drawing to a cutting example
    By luke11cnc in forum Computer Software
    Replies: 11
    Last Post: 25-09-2011, 11:19 PM
  5. drawing to g-code
    By ptjw7uk in forum Programmers Corner
    Replies: 12
    Last Post: 21-06-2009, 12:49 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules