Hewing hall millgrav

[Stocky]

Hi I am now the proud owner of a newing hall Millgrav, an older model but in beautiful condition, my question is about the controller and setting up, as there is no instructions to show how to use one of these machines, is there anyone out there in cnc land who may have some written instructions that they might want to share???

I am not used to posting stuff, else I would paste the text in, but it appears that is not possible. The filr I wanted to send you is an RTF, so in order to send it I have renamed it with the extension PNG. If you actuall get this you need to copy the file and rename it to an RTF. The file is called JLS_FIRMWARE_INSTALL Good luck!
No sorry, I can not see how to send this RTF, so contact me: - [email protected]

[Clive S]

I am not used to posting stuff, else I would paste the text in, but it appears that is not possible. The filr I wanted to send you is an RTF, so in order to send it I have renamed it with the extension PNG. If you actuall get this you need to copy the file and rename it to an RTF. The file is called JLS_FIRMWARE_INSTALL Good luck!
No sorry, I can not see how to send this RTF, so contact me: - [email]

Stocky Welcome to the forum. I would remove your email because of the spammers out there. Also you do realise that this post is about 5 years old.