Thread: PCB prototypes
-
03-01-2012 #1
I know this isn't entirely CNC related, but since I know a few of you make your own PCBs, I figured I'd ask here.
I'm needing to make a few small PCBs (a few of the same design) with a sprinkling of SMD components (design isn't 100% finished just yet), and am looking to get some boards made, so I then just need to solder on the required components.
Olimex is my currently favoured option, because I've bought some of their stuff before, and they've been good to deal with. They're prices seem reasonable for PCBs, or at least they work out far cheaper than the ready made option I've been using in my breadboards!
Are there any other suppliers I should be looking at?
Lead time isn't too much of an issue, as I've still got a good bit of programming and testing to do before I finalise the design, but I'm not wanting to wait weeks!
-
03-01-2012 #2
Depending on the size and quantity of the boards you need, check out Seeed Studio.
You'll need to supply them with Gerber files.
Quick service and cheap price.
-
03-01-2012 #3
I've got a mate in the US who use's seed and they are very good so he tells me.
.Me
-
03-01-2012 #4
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks