Threaded View
-
21-10-2008 #1
HI All
I have a bit of a problem, and I wonder if any one can help, I will start at beginning, I have a 1250mm x 1250mm gantry type plasma table runnung mach3, a Campbell Designs BOB, Gechko 203v`s and 425oz 23 size motors, all running free, no binding
my problem seems to be in softlimits the machine will only jog at 20% unless I up the speed % to 100% then its fine, joggin on keyboard is all I have done up to now
my settings are in the atachment
Rev soft m soft Min slow Z Home off home neg auto zero speed%
X X 1211 5.00 0.0 0.0000 X tick 100
Y X 1220 5.00 0.0 0.0000 X tick 100
Z X 5.00 -0.10 0.50 0.0000 tick tick 100
A X 1211 5.00 0.0 0.0000 X tick 100
What am I doing wrong?
I have another small problem when I "REF ALL HOME" after the first limit and clears it it activates the ESTOP, how do I stop that?
Thanks for your help
Steve
Thread Information
Users Browsing this Thread
There are currently 4 users browsing this thread. (0 members and 4 guests)
Similar Threads
-
Boxford 125 TCL Searching for machine problem
By dragon in forum Boxford LathesReplies: 1Last Post: 28-12-2014, 09:27 PM -
Mach3 & V-Carve Problem
By Ricardoco in forum Computer SoftwareReplies: 2Last Post: 31-05-2013, 12:53 PM -
Mach3 small problem
By dudz in forum Artsoft Mach (3 & 4)Replies: 7Last Post: 15-11-2012, 05:56 PM -
Location of machine problem
By Eugene in forum Computer SoftwareReplies: 2Last Post: 27-01-2011, 07:00 AM -
Machine Problem - Rockcliff
By Lee Roberts in forum Machine DiscussionReplies: 24Last Post: 19-02-2009, 04:49 PM
Bookmarks